What are the equipment needed for gold mining

By -

 Gravity separation is an older method of beneficiation, which uses different settling speeds of materials in the medium for separation. For placer gold mines, due to mechanical and weathering effects, the gold-bearing parent rock is gradually broken into granular objects such as cuttings. Under the action of external force, minerals with larger specific gravity are deposited on river beds, mountain slopes and other places to form Enriched. For the sorting of placer gold ore, re-election is a more direct and economical method, and the beneficiation process of re-election includes cracking, screening, dehydration, separation and other stages. Reselection methods include jig selection, shaker selection, chute selection, centrifugal selection and other processes. These gravity separation methods are mostly used in placer gold ore with monomer dissociation, and are rarely used alone. They are generally used in combination with other processes to recover gold ore more effectively. The following briefly introduces the equipment used for reselection.

1. Jig



The jig uses water as the beneficiation medium and uses the difference in the specific gravity of the selected minerals and gangues for separation. The Xinhai mineral processing jig is improved on the basis of the traditional jig, so that the jigging pulse curve is in a sawtooth waveform, and the rising water flow is faster than the falling water flow, so that the heavy mineral particles in the mineral can be fully settled and the recovery rate is improved.

2. Spiral chute



The main equipment of the chute for gold selection is the spiral chute, which is sorted with the help of inclined water flow. Its working characteristic is that the end of the tank is concentrated, medium ore, and tailings, without flushing water during the sorting process. The position of the regulating valve block is used to change the cutting width of various products. The change of the cross-sectional curvature of the spiral chute is particularly suitable for the selection of fine-grained materials. The beneficiation chute can be lined with FRP, wear-resistant rubber, and polyurethane rubber for users to choose independently.

3. Shaker



The shaker is a device for sorting in a horizontal medium flow, which uses the asymmetric reciprocating motion of the bed surface to realize the sorting of light and heavy minerals. The ore particles are fed into the ore tank, and at the same time, horizontal flushing water is supplied from the water supply tank. Under the action of gravity, impulse, friction, etc., the ore particles are layered according to specific gravity and particle size, and make asymmetrical reciprocating movement along the bed surface. Discharge from different areas to get different products.

Comments

Post a Comment

Popular posts from this blog

Selection of spodumene flotation reagents

By -
Image
At present, the  beneficiation methods of spodumene  mainly include: manual separation, thermal disintegration, magnetic separation, resuspension method,  flotation method  and combined beneficiation method. Among them, the flotation method of spodumene is the most studied in the laboratory and the most widely used mineral processing method in industry. 1. Cationic collectors The cationic collectors used in the flotation of spodumene ore are mainly amine collectors, which flotate gangue minerals such as quartz, feldspar and mica under acidic conditions, and leave the spodumene at the bottom of the tank. This method is often used in the roughing of spodumene, and cannot directly obtain spodumene concentrate with higher purity, and needs to be used in conjunction with other sorting methods. In production practice, Yan Gengsheng used  the process of flotation of spodumene  with mixed soap and diesel oil under alkaline conditions after flotation of mica with phylloylamine under acidic cond
Read more

How to use inclined plate thickener for tailings dry discharge

By -
Image
 Tailings treatment is an important part of mine production. Concentration in dry tailings discharge is an important link in achieving dry stacking. It not only directly affects the processing capacity of filter equipment, but also affects the resistance of filter cakes. The particle is resistive to the filter cake, so according to the characteristics of iron tailings, there is a new type of thickener . The flow of tailings slurry in the thickener is ideally slow. As soon as the solid particles leave the flow layer, they will be considered as sediment. This model is also called shallow sedimentation. The sedimentation occurs in the void between the inclined plates. Within the cavity, but due to the small spacing between the inclined plates, it creates favorable conditions for the formation of laminar flow. The clarified overflow water moves upward along the inclined plate space, and the solid particles settle between the two plates, and only need to settle to a small distance to fall o
Read more

A new type of coarse particle flotation machine for rough grinding and flotation in mines

By -
 Coarse ore flotation has always been one of the key technologies for mine coarse grinding and flotation to reduce energy consumption. An iron ore plant in Anhui Province has a very small content of mica in the iron ore of the first grinding product. Recovery value. However, there are generally two ways to recover mica at present: one is coarse-grained regrind and reselection; the other is to choose equipment suitable for coarse-grained mineral flotation. However, during the inspection of the production site, it was found that many of the mica minerals in the second-stage grinding products in this iron ore did not meet the particle size requirements of flotation, and the density of mica was small, and most of them showed flaky structure. The overflow of the cyclone ran out, causing the inspection and screening operation to be blocked first, so regrinding is not suitable for the recovery of coarse mica.     The design principle of coarse-grained flotation machine is that coarse-grained
Read more