Gold ore flotation process

By -

The theoretical basis of various gold flotation processes is roughly the same, that is, gold ore particles can aggregate at the liquid-gas or water-oil interface due to the hydrophobic properties of their own surfaces or the hydrophobic properties obtained by flotation reagents.

The most widely used method is froth flotation. The ore is crushed and pulverized to dissociate various minerals into individual particles, and make the particle size meet the requirements of the flotation process. Various flotation agents are added to the milled pulp and mixed and mixed to interact with the mineral particles to expand the floatability difference between different mineral particles. The adjusted gold ore pulp is sent to the flotation cell, stirred and aerated.

gold.jpg

The ore particles in the slurry contact and collide with the air bubbles, and the ore particles with good floatability selectively adhere to the air bubbles and are carried up to form a mineralized foam layer composed of gas-liquid-solid three-phase. The pulp surface overflows, and then dewaters and dries into a gold concentrate product. Mineral particles such as gangue that cannot float are discharged from the bottom of the flotation tank with the pulp as tailings.

The process is used to reflect the principle scheme of various ore sorting, including the process used for sorting, the sequence between each process, etc. Due to the large differences in the characteristics of gold mines such as khenbu particle size, dissemination characteristics, argillization characteristics, and associated mineral components, there are certain differences in the flotation process of different gold mines. The common principle processes are as follows:

1. Flotation + cyanide leaching

It is often used to treat sulfide ore containing a certain amount of gold and silver. In the process flow, the gold ore is firstly subjected to flotation operation, and a small amount of concentrate obtained by flotation is then subjected to cyanidation leaching. Compared with all-slime cyanidation, this process does not require fine grinding and leaching of all minerals, which is more time-saving, labor-saving and money-saving.

2. Flotation + concentrate roasting + calcine leaching

This gold ore flotation process is generally used for insoluble gold-arsenic ore, gold-antimony ore and gold-pyrite with extremely high sulfide content. A small amount of concentrate is obtained by flotation, which reduces the processing capacity of subsequent operations. The purpose of intermediate roasting is to remove elements such as arsenic and antimony that are harmful to cyanidation leaching.

3. Flotation + flotation concentrate pyroprocessing

A small amount of concentrate products should be obtained by flotation first, and then the remaining impurities should be removed by heating, melting and smelting. This gold ore flotation process is often used to treat most sulfide ores containing gold and silver. During the flotation process, gold and silver enter the closely related minerals such as copper and lead, and finally the flotation concentrate is sent to the smelter for purification.

4. Flotation + flotation tailings or medium ore cyanation + flotation concentrate roasting cyanidation in situ

This method is commonly used in the industry to process quartz sulfide ore containing gold telluride, pyrrhotite, chalcopyrite and other sulfide ores. The sulfide ore concentrate is obtained by flotation, and the gold and silver in it are exposed by roasting. Cyanide leaching was performed on the roasted product. At the same time, due to the high content of gold and silver in the middle and tailings obtained by flotation, it needs to be recovered by cyanidation leaching.

5. Raw ore cyanide + cyanide tailings flotation

For some sulfide ore containing gold and silver, cyanidation cannot completely recover the gold and silver in it, so the cyanided slag is flotated to improve the gold and silver recovery rate.

Gold ore flotation process is a relatively complex beneficiation process. In the beneficiation process, there are many types of flotation processes, such as preferential flotation, mixed flotation, partial mixed preferential flotation, equal flotation, branched series flotation, flash flotation, and rapid flotation.


Comments

Post a Comment

Popular posts from this blog

Selection of spodumene flotation reagents

By -
Image
At present, the  beneficiation methods of spodumene  mainly include: manual separation, thermal disintegration, magnetic separation, resuspension method,  flotation method  and combined beneficiation method. Among them, the flotation method of spodumene is the most studied in the laboratory and the most widely used mineral processing method in industry. 1. Cationic collectors The cationic collectors used in the flotation of spodumene ore are mainly amine collectors, which flotate gangue minerals such as quartz, feldspar and mica under acidic conditions, and leave the spodumene at the bottom of the tank. This method is often used in the roughing of spodumene, and cannot directly obtain spodumene concentrate with higher purity, and needs to be used in conjunction with other sorting methods. In production practice, Yan Gengsheng used  the process of flotation of spodumene  with mixed soap and diesel oil under alkaline conditions after flotation of mica with phylloylamine under acidic cond
Read more

How to use inclined plate thickener for tailings dry discharge

By -
Image
 Tailings treatment is an important part of mine production. Concentration in dry tailings discharge is an important link in achieving dry stacking. It not only directly affects the processing capacity of filter equipment, but also affects the resistance of filter cakes. The particle is resistive to the filter cake, so according to the characteristics of iron tailings, there is a new type of thickener . The flow of tailings slurry in the thickener is ideally slow. As soon as the solid particles leave the flow layer, they will be considered as sediment. This model is also called shallow sedimentation. The sedimentation occurs in the void between the inclined plates. Within the cavity, but due to the small spacing between the inclined plates, it creates favorable conditions for the formation of laminar flow. The clarified overflow water moves upward along the inclined plate space, and the solid particles settle between the two plates, and only need to settle to a small distance to fall o
Read more

A new type of coarse particle flotation machine for rough grinding and flotation in mines

By -
 Coarse ore flotation has always been one of the key technologies for mine coarse grinding and flotation to reduce energy consumption. An iron ore plant in Anhui Province has a very small content of mica in the iron ore of the first grinding product. Recovery value. However, there are generally two ways to recover mica at present: one is coarse-grained regrind and reselection; the other is to choose equipment suitable for coarse-grained mineral flotation. However, during the inspection of the production site, it was found that many of the mica minerals in the second-stage grinding products in this iron ore did not meet the particle size requirements of flotation, and the density of mica was small, and most of them showed flaky structure. The overflow of the cyclone ran out, causing the inspection and screening operation to be blocked first, so regrinding is not suitable for the recovery of coarse mica.     The design principle of coarse-grained flotation machine is that coarse-grained
Read more