Production of battery-grade lithium

By -

 Lithium is currently produced from two main different deposit types: brine and hard rock. In mining brine deposits, brine, which is high in lithium, is pumped from below the surface. The lithium is concentrated by evaporation before the brine is sent to a processing facility for the production of lithium carbonate or lithium chloride. It can then be further processed to produce lithium hydroxide.

In hard rock operations, ore is typically extracted from pegmatite deposits using conventional mining techniques and then concentrated by crushing, heavy media separation and sometimes flotation to produce concentrates. The main lithium-bearing mineral in this ore is usually spodumene, so most of these mines produce spodumene concentrate as the final product.

194.jpg

Most of the world's battery-grade lithium is produced by:

Mining and acid leaching from i.e. LiAl(SiO3)2 produces a lithium sulfate solution, which is then electrochemically converted to battery-grade lithium carbonate or lithium hydroxide. Processed spodumene dominates production in Australia.

Lithium carbonate is concentrated and precipitated from brine by evaporation ponds. These resources tend to be of low hardness (eg, calcium, magnesium) and are located in areas with high evaporation rates, such as the high deserts of South America.

The third method, direct lithium extraction, is gaining popularity, especially in North America and China:

Direct lithium extraction involves adsorption of lithium from a brine source onto ion-exchange-type materials or beads, followed by release by washing the material with hydrochloric acid. Generates dilute lithium chloride containing impurities. We prefer to be suitable for lithium resources with higher hardness, in areas that are not suitable for evaporation ponds.

Comments

Post a Comment

Popular posts from this blog

【Phosphate ore flotation】Phosphate ore beneficiation and flotation reagents

By -
Image
Phosphorus is an important raw material for the production of phosphate fertilizer, yellow phosphorus, phosphoric acid, phosphide and other phosphate products, and is a non-renewable and alternative resource. The reserves of phosphate rock resources in my country are relatively large, but more than 70% of them are low-grade and lean ore, which cannot be industrialized only by the scrubbing process. At present, medium and low-grade phosphate rock resources are mainly used for enrichment, and the flotation effect of phosphate rock depends on the interaction between mineral particles and air bubbles in the water medium, among which flotation reagents are particularly important. Commonly used flotation processes for phosphate ore beneficiation are: positive flotation, reverse flotation, first positive then reverse flotation, first reverse then positive flotation and double reverse flotation. 1. Positive flotation process of phosphate rock The process is to grind the phosphate rock until th
Read more

Selection of spodumene flotation reagents

By -
Image
At present, the  beneficiation methods of spodumene  mainly include: manual separation, thermal disintegration, magnetic separation, resuspension method,  flotation method  and combined beneficiation method. Among them, the flotation method of spodumene is the most studied in the laboratory and the most widely used mineral processing method in industry. 1. Cationic collectors The cationic collectors used in the flotation of spodumene ore are mainly amine collectors, which flotate gangue minerals such as quartz, feldspar and mica under acidic conditions, and leave the spodumene at the bottom of the tank. This method is often used in the roughing of spodumene, and cannot directly obtain spodumene concentrate with higher purity, and needs to be used in conjunction with other sorting methods. In production practice, Yan Gengsheng used  the process of flotation of spodumene  with mixed soap and diesel oil under alkaline conditions after flotation of mica with phylloylamine under acidic cond
Read more

How to use inclined plate thickener for tailings dry discharge

By -
Image
 Tailings treatment is an important part of mine production. Concentration in dry tailings discharge is an important link in achieving dry stacking. It not only directly affects the processing capacity of filter equipment, but also affects the resistance of filter cakes. The particle is resistive to the filter cake, so according to the characteristics of iron tailings, there is a new type of thickener . The flow of tailings slurry in the thickener is ideally slow. As soon as the solid particles leave the flow layer, they will be considered as sediment. This model is also called shallow sedimentation. The sedimentation occurs in the void between the inclined plates. Within the cavity, but due to the small spacing between the inclined plates, it creates favorable conditions for the formation of laminar flow. The clarified overflow water moves upward along the inclined plate space, and the solid particles settle between the two plates, and only need to settle to a small distance to fall o
Read more